• Skip to main content
  • Skip to secondary menu
  • Skip to primary sidebar
  • Skip to footer
Engineering Designer Magazine

Engineering Designer

  • Home
  • Technology
  • Education
  • Sustainability
  • Materials
  • Medical
  • Construction
  • Advertise
  • iED
You are here: Home / Aerospace / New rotor blade design could help Mars helicopters fly further

New rotor blade design could help Mars helicopters fly further

October 27, 2026 by Grace Gourlay

There is air on Mars, just not very much of it. That presents a problem if the plan is to fly a helicopter. Its blades must generate enough lift in an atmosphere with roughly one per cent of Earth’s density, while moving fast enough for parts of the airflow to approach the speed of sound.

A new study involving Imperial College London suggests that a different blade shape could make that job easier. Working with NASA Ames Research Center, Tohoku University and Nagoya University, researchers tested a design developed specifically for these unusual conditions. It achieved up to a 43 per cent improvement in aerodynamic efficiency compared with the blade profile used on NASA’s Ingenuity helicopter.

The difference lies in the airfoil: the shape seen when a blade is viewed in cross-section. Small changes to that profile affect how air flows around it, how much lift it produces and how much drag it encounters. Getting the shape right could allow a future helicopter to make better use of the power available.

Ingenuity’s CLF-5605 airfoil was a conventional design adapted for Mars. The newer roamx-0201 profile, developed by NASA Ames’ ROAMX team, starts with the Martian atmosphere and works from there.

Advertisement

It is an awkward environment for an aircraft designer. Some aspects of the airflow resemble those around a dragonfly’s wing on Earth, where the effects of air’s viscosity are particularly important. Yet the blade also encounters conditions associated with much faster flight, as parts of the flow approach the speed of sound. A suitable profile has to cope with both.

To find out how the designs compared, the researchers combined computer simulations with experiments in Tohoku University’s Mars Wind Tunnel. The facility can reproduce key conditions of the Martian atmosphere, allowing the team to investigate performance before a blade gets anywhere near the planet.

Across the conditions tested, roamx-0201 consistently outperformed the Ingenuity profile. It generated greater lift and maintained its performance at higher operating angles, alongside the improvement in aerodynamic efficiency.

For a future mission, that could give engineers more freedom in deciding what a helicopter carries and where it goes. Better rotor performance could support longer journeys or heavier scientific instruments, opening up opportunities to investigate cliffs, deep craters and other difficult terrain.

The 43 per cent figure describes the airfoil’s aerodynamic efficiency in the study. How much further a complete helicopter could fly would depend on the rest of the aircraft, its power supply and the demands of the mission.

Advertisement

‘We’re proud to have collaborated internationally with the ROAMX team at NASA and the experimental team at Nagoya (previously Tohoku) to demonstrate the superior performance of this new airfoil,’ said Professor Oliver Buxton of Imperial’s Department of Aeronautics. ‘Hopefully this will see some action on the red planet before too long!’

Filed Under: Aerospace

Primary Sidebar

SUBSCRIBE And get a FREE Magazine

Want a FREE magazine each and every month jam-packed with the latest engineering and design news, views and features?

ED Update Magazine

Simply let us know where to send it by entering your name and email below. Immediate access.

Trending

Foldable cycle helmets show room for improvement in impact tests

Women’s Engineering Society announces upcoming engineering careers and networking events

UK firms join forces to streamline grid control system delivery

Edinburgh to host £18m academy for UK chip designers

New design method could help stop building failures spreading

UK team develops manufacturing route for ceramic engine components

Scottish pupils use digital twins in new route into engineering

UK roadmap aims to bring metamaterials into everyday technology

New rotor blade design could help Mars helicopters fly further

European project tests ammonia and hydrogen fuels for cement production

Footer

About Engineering Designer

Engineering Designer is the quarterly journal of the Insitution of Engineering Designers.

It is produced by the IED for our Members and for those who have an interest in engineering and product design, as well as CAD users.

Click here to learn more about the IED.

Other Pages

  • Contact us
  • About us
  • Privacy policy
  • Terms
  • Institution of Engineering Designers

Search

Tags

ied

Copyright © 2026 · Site by Syon Media