By using a carbonated, rather than still, water-based solution during the concrete manufacturing process, a Northwestern University-led team of engineers has discovered a new way to store carbon dioxide in the ubiquitous construction material. Not only could the new process help sequester CO2 from the ever-warming atmosphere, it also results in concrete with uncompromised strength and durability.
In laboratory experiments, the process achieved a CO2-sequestration efficiency of up to 45 per cent, meaning that nearly half of the CO2 injected during concrete manufacturing was captured and stored. The researchers hope their new process could help offset CO2 emissions from the cement and concrete industries, which are responsible for eight per cent of global greenhouse gas emissions.
Advertisement
‘The cement and concrete industries significantly contribute to human-caused CO2 emissions,’ said Alessandro Rotta Loria, the Louis Berger assistant professor of civil and environmental engineering at Northwestern’s McCormick School of Engineering. ‘We are trying to develop approaches that lower CO2 emissions associated with those industries and, eventually, could turn cement and concrete into massive carbon sinks. We are not there yet, but we now have a new method to reuse some of the CO2 emitted as a result of concrete manufacturing in this very same material. And our solution is so simple technologically that it should be relatively easy for industry to implement.’
‘More interestingly, this approach to accelerate and accentuate the carbonation of cement-based materials provides an opportunity to engineer new clinker-based products where CO2 becomes a key ingredient,’ said Davide Zampini, vice president of global research and development at CEMEX, a global building materials company dedicated to sustainable construction that collaborated with Rotta Loria’s lab for the study.
Advertisement
A non-negotiable part of infrastructure, concrete is one of the world’s most consumed materials – second only to water. To make concrete in its simplest form, workers combine water, fine aggregates (such as sand), coarse aggregates (such as gravel) and cement, which binds all the ingredients together. Since the 1970s, researchers have explored various ways to store CO2 inside concrete.
Processes to store CO2 fall into one of two categories: hardened concrete carbonation or fresh concrete carbonation. In the hardened approach, solid concrete blocks are placed into chambers where CO2 gas is injected at high pressures. In the fresh version, workers inject CO2 gas into the mixture of water, cement and aggregates while concrete is being produced.
Advertisement
In both approaches, some of the injected CO2 reacts with the cement to become solid calcium carbonate crystals. Both techniques, however, share deal-breaking limitations. They are hindered by low CO2 capture efficiency and high energy consumption. Even worse, the resulting concrete is often weakened, hampering its applicability.
In Northwestern’s new approach, the researchers leveraged the fresh concrete carbonation process, but instead of injecting CO2 while mixing all of the ingredients together, they first injected CO2 gas into water mixed with a small amount of cement powder. After mixing this carbonated suspension with the rest of the cement and aggregates, they achieved a concrete that actually absorbed CO2 during its manufacturing.
‘The cement suspension carbonated in our approach is a much lower viscosity fluid compared to the mix of water, cement and aggregates that is customarily employed in present approaches to carbonate fresh concrete,’ Rotta Loria said. ‘So, we can mix it very quickly and leverage the very fast kinetics of the chemical reactions that result in calcium carbonate minerals. The result is a concrete product with a significant concentration of calcium carbonate minerals compared to when CO2 is injected into the fresh concrete mix.’
Advertisement
After analysing their carbonated concrete, Rotta Loria and his colleagues found its strength rivalled the durability of regular concrete. ‘A typical limitation of carbonation approaches is that strength is often affected by the chemical reactions,’ he said. ‘But, based on our experiments, we show the strength might actually be even higher. We still need to test this further, but, at the very least, we can say that it’s uncompromised. Because the strength is unchanged, the applications also don’t change. It could be used in beams, slabs, columns, foundations – everything we currently use concrete for.’
‘The findings of this research underline that although carbonation of cement-based materials is a well-known reaction, there is still room to further optimise the CO2 uptake through better understanding of the mechanisms tied to materials processing,’ Zampini said.
Advertisement
The research has been published in Communications Materials.